Ignition barrel illumination LED
Posted: Wed Apr 01, 2015 12:14 pm
Hi All,
Bulb went in ignition barrel, so replaced instead with and a clear 1.5v LED, as didn't have a spare
For a 1.5v led you need around 800 ohm resistor soldered onto one of the legs, works ok I think.
C
Bulb went in ignition barrel, so replaced instead with and a clear 1.5v LED, as didn't have a spare
For a 1.5v led you need around 800 ohm resistor soldered onto one of the legs, works ok I think.
C