i have mounted a b18ft engine on a renault 12, with the complete electrical wiring for the 2 ecu`s.
a have the red "plug" in wich i have connected the + ignition and + fuel pump on the grey, and grey red wire.
the rest is correct, ignition coil, main 12v, all the earths are plugged...
a have one problem, im having low spark on the spark plug, while i turn the key... and itwont start.
any ideas...?
i need help
Moderators: jifflemon, coyote1980, Rachel
- doingitsideways
- 480 Expert
- Posts: 659
- Joined: Wed May 02, 2012 8:55 pm
- Location: Manchester
Re: i need help
Sorry, I have no idea which wires you are referring to.
But have you checked the basics, like ignition coil, ht leads, distributor cap and rotor arm??
I would have thought that you would have spark or not, rather than weak spark if your problem was ECU related.
Steve
But have you checked the basics, like ignition coil, ht leads, distributor cap and rotor arm??
I would have thought that you would have spark or not, rather than weak spark if your problem was ECU related.
Steve
"If you can't fix it with a hammer, it's an electrical fault!"
Hammers can't fix a 480!!!
Hammers can't fix a 480!!!