dead infocentre

From CEM to VEM, from LED to lightbulb and more. If you have an electrical problem, like a broken info-centre, search for answers in this category. This is also the place to be when you expect the problem to be of an electrical nature...

Moderators: jifflemon, coyote1980, Rachel

GTImk1
480 Newbie
Posts: 39
Joined: Wed Jan 16, 2008 12:45 am
Location: Portugal, Lisbon

Post by GTImk1 » Sun Jun 14, 2009 12:03 am

Check the earths near the alternator in the mounting where the engine shock absorber is.
There must be three wires in the bottom right screw from that mounting, one of them is the earth for the info center.

I had the same problem in mine, the terminal was damaged, replaced it and it works now.

Iroll480
Can tell where the 480 was built
Posts: 332
Joined: Sat Aug 23, 2008 7:33 am

Post by Iroll480 » Sun Jun 14, 2009 1:50 pm

There's a small brown/blue wire on the altenator which is the earth for the info centre. Check that one for bad connection.

User avatar
carl
Started learning about 480
Posts: 51
Joined: Sun Jan 20, 2008 10:09 pm
Location: Belfast
Contact:

Post by carl » Wed Jun 17, 2009 9:30 pm

Try putting pressure on your clocks near the info center side..it might stop the info center googling up then you'll know if its the info center unit itself!
Volvo C30 is guilty of plagiarism!!!!!!!!

[img]http://i41.photobucket.com/albums/e279/thisismyminiadventure/2008/09-14-08_Volvo/05.jpg[/img]

User avatar
Agwa Moose
480 Veteran
Posts: 750
Joined: Sat Apr 09, 2005 11:44 pm
Location: in your garden shed

Post by Agwa Moose » Thu Jun 18, 2009 9:03 pm

The Mad all lights on mode was the selector switch, replaced it with one that wasnt all corroded inside and it never happened again

J
Gwendoyln! They're hanging bicycle parts on me again!

Post Reply