From CEM to VEM, from LED to lightbulb and more. If you have an electrical problem, like a broken info-centre, search for answers in this category. This is also the place to be when you expect the problem to be of an electrical nature...
Moderators: jifflemon, coyote1980, Rachel
-
GTImk1
- 480 Newbie
- Posts: 39
- Joined: Wed Jan 16, 2008 12:45 am
- Location: Portugal, Lisbon
Post
by GTImk1 » Sun Jun 14, 2009 12:03 am
Check the earths near the alternator in the mounting where the engine shock absorber is.
There must be three wires in the bottom right screw from that mounting, one of them is the earth for the info center.
I had the same problem in mine, the terminal was damaged, replaced it and it works now.
-
Iroll480
- Can tell where the 480 was built
- Posts: 332
- Joined: Sat Aug 23, 2008 7:33 am
Post
by Iroll480 » Sun Jun 14, 2009 1:50 pm
There's a small brown/blue wire on the altenator which is the earth for the info centre. Check that one for bad connection.
-
carl
- Started learning about 480
- Posts: 51
- Joined: Sun Jan 20, 2008 10:09 pm
- Location: Belfast
-
Contact:
Post
by carl » Wed Jun 17, 2009 9:30 pm
Try putting pressure on your clocks near the info center side..it might stop the info center googling up then you'll know if its the info center unit itself!
Volvo C30 is guilty of plagiarism!!!!!!!!
[img]http://i41.photobucket.com/albums/e279/thisismyminiadventure/2008/09-14-08_Volvo/05.jpg[/img]
-
Agwa Moose
- 480 Veteran
- Posts: 750
- Joined: Sat Apr 09, 2005 11:44 pm
- Location: in your garden shed
Post
by Agwa Moose » Thu Jun 18, 2009 9:03 pm
The Mad all lights on mode was the selector switch, replaced it with one that wasnt all corroded inside and it never happened again
J
Gwendoyln! They're hanging bicycle parts on me again!