Stalls in reverse...often

All the information you need on engine-problems is here. The engine includes the Turbo-charger, airco and everything else you'll find under the bonnet.

Moderators: jifflemon, coyote1980, Rachel

Post Reply
hereagain
Knows an Aerodeck isn't a 480
Posts: 208
Joined: Tue Oct 14, 2003 1:36 pm
Location: Cambs, UK
Contact:

Stalls in reverse...often

Post by hereagain » Sat Feb 07, 2004 10:03 pm

My car stalls in reverse, usually when parking, just as I am about to engage first..stall, restarts fine...

any ideas where to start, have replaced distributor cap and arm, plugs are bosche 4's...other than that no probs.
Black 480ES J Plate
http://img5.photobucket.com/albums/v14/Hereagain/
Steve
Cambs

User avatar
volvofox
480 Is my middle name
Posts: 2034
Joined: Sun Jan 19, 2003 2:18 pm
Location: Born, Netherlands
Contact:

Post by volvofox » Sun Feb 08, 2004 2:04 pm

your car must not be rolling (standing still) and you must cluch fully, gently and a lot before you jam your shiftlever in the rear gear.

remember, the rear gear and mostly the first also are not synchronized on most cars.

if you shift to rear and your car is rolling (mountainous roads) the gears shift very agressive. this can stall your car.....

but I aspect you to know this ? anyway , I hope its this.
luck,
JPF


Nomen est Omen

hereagain
Knows an Aerodeck isn't a 480
Posts: 208
Joined: Tue Oct 14, 2003 1:36 pm
Location: Cambs, UK
Contact:

Post by hereagain » Sun Feb 08, 2004 9:47 pm

no problems at all getting in reverse and reversing, it is when clutch is depressed and gear engaged across to first, noticed as the steering wheels suddenly becomes real heavy!!

Apart from this I am having no problems!!
Black 480ES J Plate
http://img5.photobucket.com/albums/v14/Hereagain/
Steve
Cambs

User avatar
pol
480 Is my middle name
Posts: 2794
Joined: Wed Jan 22, 2003 10:48 pm
Location: Eastbourne

Post by pol » Sun Feb 08, 2004 10:50 pm

I don't see how it would be related to the gear you're in apart from what volvofox said, but if this was the case, you'd know about it as it would be pretty impossible to get it in gear.

Maybe an idle problem. Maybe it's caused by your power steering pump??

pol

hereagain
Knows an Aerodeck isn't a 480
Posts: 208
Joined: Tue Oct 14, 2003 1:36 pm
Location: Cambs, UK
Contact:

Post by hereagain » Mon Feb 09, 2004 5:33 pm

could be onto something there, maybe I should have written reversing and turning, any ideas on what to look for??
Black 480ES J Plate
http://img5.photobucket.com/albums/v14/Hereagain/
Steve
Cambs

User avatar
pol
480 Is my middle name
Posts: 2794
Joined: Wed Jan 22, 2003 10:48 pm
Location: Eastbourne

Post by pol » Mon Feb 09, 2004 8:45 pm

Well sounds like the power steering pump could be putting too much strain on the engine? Could be as simple as belt tensions or fluid, or as bad as worn pump or steering gear. This is all just opinion, not from experience but hope its helpful. I would have thought there was some sort of device to up the idle speed when turning???

pol

hereagain
Knows an Aerodeck isn't a 480
Posts: 208
Joined: Tue Oct 14, 2003 1:36 pm
Location: Cambs, UK
Contact:

Post by hereagain » Sat Feb 14, 2004 6:55 pm

Pol, this stalling does seem to be connected to the steering, but only when reversing, having said that, I will try slow forward direction tight turning to see if that has the same effect.

Haven't had time to check anything on the car yet, not even fluids, but will on my next day off - Tuesday!!!

How would I know what to look for in the tension belt /steering gear...I will manage the fluids with out help!!!

Thanks, any helpful hints or suggestions are welcomed and appreciated.

HA
Black 480ES J Plate
http://img5.photobucket.com/albums/v14/Hereagain/
Steve
Cambs

hereagain
Knows an Aerodeck isn't a 480
Posts: 208
Joined: Tue Oct 14, 2003 1:36 pm
Location: Cambs, UK
Contact:

Post by hereagain » Sun Feb 15, 2004 6:50 pm

harder to do moving forwards....only managed it twice, so think this does only apply in reverse...
Black 480ES J Plate
http://img5.photobucket.com/albums/v14/Hereagain/
Steve
Cambs

User avatar
pol
480 Is my middle name
Posts: 2794
Joined: Wed Jan 22, 2003 10:48 pm
Location: Eastbourne

Post by pol » Mon Feb 16, 2004 3:50 am

Ok.... So still working on a hunch..... Try it with your lights on, forwards...

If not... Who knows what i has thinking... !!

pol

User avatar
kingrichy
Can tell where the 480 was built
Posts: 315
Joined: Sun Dec 14, 2003 7:29 pm
Location: Roosendaal,The Netherlands
Contact:

Post by kingrichy » Mon Feb 16, 2004 4:35 pm

And also take a look at your idle.

MatBat
480 Is my middle name
Posts: 2684
Joined: Thu Oct 09, 2003 7:16 pm
Location: Chichester, West Sussex
Contact:

Post by MatBat » Mon Feb 16, 2004 4:38 pm

maybe the reverse gear is sticky.
1996 Mini Classic 1275.

Post Reply