Hi
I can see you have a different intake than me so i just wanna show where the problem is on the B18E engine.
It is beneath the intake on this model, not easy to see!
Search found 103 matches
- Fri Jul 29, 2011 7:40 am
- Forum: Engine (20)
- Topic: Idle problem
- Replies: 10
- Views: 2565
- Wed Jul 27, 2011 10:01 pm
- Forum: Electrical system (30)
- Topic: Info center "STOP" water fail?
- Replies: 18
- Views: 2881
Re: Info center "STOP" water fail?
glasgowjim wrote:pcb board has died.
For real? DAMN i have 2 and they both says STOP... that cant be right? what can it be? how can I test the PCB?
- Mon Jul 25, 2011 9:14 pm
- Forum: Electrical system (30)
- Topic: Info center "STOP" water fail?
- Replies: 18
- Views: 2881
Re: Info center "STOP" water fail?
what is that? i do not know what that stands for. where is it placed?glasgowjim wrote:pcb board has died.
yes can anyone help me with that?Captain Slow wrote:What would be the default that the infocentre displays if the temp sensor is not providing a signal-might it be 'stop' just to be safe?
what can i do now?
- Mon Jul 25, 2011 12:21 pm
- Forum: Electrical system (30)
- Topic: Windscreen Washers
- Replies: 10
- Views: 2118
Re: Windscreen Washers
how do i test the pumps? i have tried to connect one of the directly to the battery, but nothing happens. is it dead then? or am I doing it wrong?
I have the same problem. no sound from any of my 3 pumps. (front, rear, headlamp pump)
I have the same problem. no sound from any of my 3 pumps. (front, rear, headlamp pump)
- Mon Jul 25, 2011 12:15 pm
- Forum: Engine (20)
- Topic: Idle problem
- Replies: 10
- Views: 2565
Re: Idle problem
Hi Van
i found the missing bolt you was talking about, thank you:) no it is much better, 900-1000 RPM´s in idle could
i found the missing bolt you was talking about, thank you:) no it is much better, 900-1000 RPM´s in idle could
- Mon Jul 25, 2011 12:13 pm
- Forum: Electrical system (30)
- Topic: Info center "STOP" water fail?
- Replies: 18
- Views: 2881
Re: Info center "STOP" water fail?
I have just tried again today, the STOP is always on, and is indicating that it is the water that is the problem....
it is on when it is could and has not been started for a few days.
so always on....
what can do this?
it is on when it is could and has not been started for a few days.
so always on....
what can do this?
- Sun Jul 24, 2011 9:51 am
- Forum: Engine (20)
- Topic: Idle problem
- Replies: 10
- Views: 2565
Re: Idle problem
Van wrote:A suggestion, on the front of the engine is a thing that is fitted with a bolt that goes into the air intake of the engine. Without the bolt the engine does get false air.
du you have a picture?
- Sun Jul 24, 2011 9:48 am
- Forum: Electrical system (30)
- Topic: Info center "STOP" water fail?
- Replies: 18
- Views: 2881
Re: Info center "STOP" water fail?
when i took the photo i could not move the functions in the info center, it would not react on my temps to move the funcition-button.. I thorough that it was because of the STOP warning, but should i be able to switch between the functions anyway?
I will chek it next time
I will chek it next time
- Sat Jul 23, 2011 12:00 pm
- Forum: Electrical system (30)
- Topic: Info center "STOP" water fail?
- Replies: 18
- Views: 2881
Re: Info center "STOP" water fail?
how can I check the thermostat? can i measure it?
i have a little leak somewhere, but it is not much.
i have a little leak somewhere, but it is not much.
- Fri Jul 22, 2011 9:19 pm
- Forum: Electrical system (30)
- Topic: Info center "STOP" water fail?
- Replies: 18
- Views: 2881
Info center "STOP" water fail?
Hey guys my info center has ben out of function for some time, but yeasterday I plug it out and cleand the connections ant put it back together. Now it works, but it keeps saying "STOP" and showing that there is a problem with the water... http://bilgalleri.dk/alb_vis.aspx?albumid=82007 See picture ...
- Wed Jul 13, 2011 7:14 pm
- Forum: Engine (20)
- Topic: Idle problem
- Replies: 10
- Views: 2565
Re: Idle problem
Hi
No it is a B18E engine.
I have tried to clean it and it seems ok.
Can it be the idle regulator? the long thing with in and outlet? it buzz then i have the ignition on, just before i start the engine. is it spouse to do that?
No it is a B18E engine.
I have tried to clean it and it seems ok.
Can it be the idle regulator? the long thing with in and outlet? it buzz then i have the ignition on, just before i start the engine. is it spouse to do that?
- Wed Jul 06, 2011 8:06 am
- Forum: Engine (20)
- Topic: Idle problem
- Replies: 10
- Views: 2565
Idle problem
Hello Volvo people I have just fired up the engine and it is giving me some trouble. The first time I turned it on, the car-infocenter worked, but the engine hovered about 1300 RPM and suddenly it accelerated to 4000 RPM where it stayed :shock: I quickly turn the engine off. I have to mention that t...
- Mon Nov 08, 2010 6:07 pm
- Forum: Brakes (50)
- Topic: Replacing break pips
- Replies: 2
- Views: 3012
Replacing break pips
Hi I want to replace all the break pips on my 480 ES 1,7 from 1987. Can anyone give me a guide or "how to do" for this task? The old pips are leaking and needs to be replaced. I fear I need to dismantle the fuel tank... is there a another way? I hope you can help me with this, I have never done it b...
- Mon Nov 08, 2010 5:56 pm
- Forum: Engine (20)
- Topic: how to test fuel pump
- Replies: 2
- Views: 994
how to test fuel pump
Hello I have a spare car (480 1,7 ES 1988) and i want to test the fuel pump... is there a easy way to test it? The connection plug has 5 pin-connections, is it possible to connect it directly to a battery and see if it is working? The car itself can not start, so I can't try it that way. Can anyone ...
- Sun Sep 05, 2010 3:44 pm
- Forum: Body and Interior (80)
- Topic: Headlamps adjustable mekanism
- Replies: 1
- Views: 1428
Headlamps adjustable mekanism
Hello I am working on my headlamps. and the three small screws that is holding the headlamp in place, are all rusted and some broken.... is there an alternativ way to fix it, or do I need to by original parts for this? http://images.bilgalleri.dk/uploads_alb_large_wm/1369583_l.jpg I hope you can hel...
- Sat Sep 04, 2010 2:29 pm
- Forum: Engine (20)
- Topic: Engine block
- Replies: 2
- Views: 988
Engine block
Hi guys How do I know if my car has a B18E, ES or somthing els? arcordig to the VIN reader it should have a B18E engine. but I would like to have that confirmed... I don not know if the engine has bin replaced... I only found this: J 5998441 AF 50, number on the engine block. is there anyone how can...
- Mon Aug 30, 2010 7:44 am
- Forum: Engine (20)
- Topic: High RPM in Idle, and more
- Replies: 5
- Views: 1377
Re: High RPM in Idle, and more
New video of my car
I drove my car for the first time ever! hole 3 meters, it was a grate feeling! but it was too short....
Can anyone tell my what they think when they hear the engine?
http://bilgalleri.dk/vid_vis.aspx?VideoID=37915
Tank you
I drove my car for the first time ever! hole 3 meters, it was a grate feeling! but it was too short....
Can anyone tell my what they think when they hear the engine?
http://bilgalleri.dk/vid_vis.aspx?VideoID=37915
Tank you
- Thu Aug 19, 2010 6:11 pm
- Forum: Parts, Accessories & Brochures
- Topic: WANTED: Steel bumpers - For and back
- Replies: 3
- Views: 608
Re: WANTED: Steel bumpers - For and back
Well... dos the total expenses over due the offer I got from the local dealer? 120£ damn, I had hoped that I could get it a lot cheaper! I can understand that the bumpers has the ability to vanish? even my donate car is useless in this situation... I don't suppose that MOT is going to approve the c...
- Thu Aug 19, 2010 3:41 pm
- Forum: Parts, Accessories & Brochures
- Topic: WANTED: Steel bumpers - For and back
- Replies: 3
- Views: 608
WANTED: Steel bumpers - For and back
Hi guys I am working on my lovely car, but after doing a little work on it, I found that the steel bumper in bouth ends was almost gone.... Dos any one know where to get them cheap? I asked some danish dealers, and they want 120£ for each bumper... is it possible to get new ones, or 2 hands in good...
- Thu Aug 19, 2010 3:31 pm
- Forum: Body and Interior (80)
- Topic: steel bumper???
- Replies: 0
- Views: 1023
steel bumper???
Hi guys I am working on my lovely car, but after doing a little work on it, I found that the steel bumper in bouth ends was almost gone.... Dos any one know where to get them cheap? i asked sone of the dealers, and they want 120£ for each bumber... is it possible to get new ones, or 2 hands in good...