Volvo 480 Club Europe

That's a good idea Kev. I'll knock the hinge off the door and check it like that.

cheers buddy

very bored sometimes on these 12hr days.

Ahhh I see it's bent outwards near the end so would not have been making contact onto the bodywork. Hard to see really so more guessing, I could be wrong.

Get some of this!

http://i2.photobucket.com/albums/y33/volvoforum/116301_3.jpg FYI 2 x M12 x 1.25 pitch x 30mm Socket Capscrew A2 (Fully threaded) (DIN912M12x1.25x30) @ 2.70 each From http://www.a2stainless.co.uk/ 2 per side! Which hold the brake pad bracket to the hub. No more rust :D I had massive problems getting...

high on a fwd car. Think how fast it spins!

PPC all the way My favorite mag along with and then

Whats everyone else reading?

http://www.youtube.com/watch?v=mKOEQVgONh0&NR=1

rofl

http://i15.photobucket.com/albums/a376/RC5420/780050oh0.jpg http://i15.photobucket.com/albums/a376/RC5420/780036qs9.jpg http://i15.photobucket.com/albums/a376/RC5420/780034fu9.jpg http://i70.photobucket.com/albums/i95/ckallis500/flywheelbang.jpg Hope it's not cracked. How does removing steel help i...

Did you get the rich mods in the end ??

Passenger side front.

Needs to have no damage.

Cheers

Did some 480 or 480 aftermarket parts come without studs for the shocks top mounts?

Using a bolt instead... :S

So your saying to knock the car mounted hinge more forwards. I'm not keen on that. Anyone else like to bring an idea to the thread?

Cheers

Martin

remove the idle valve and soak it in a plastic bag with cellouse thinners or carb cleaner. Shake it for a few mins and see how much crud comes out. also check under the intercooler top pipes (Hard plastic from near rad) there are 2 wires with bullets on the end. If these are connected it will not id...

nice post mate. Some are good cars and some are evil. Glad it's going so well

Does the rad fan keep kicking in still ?

25psi for me but only went it went LEAN!

http://www.kapaza.be/Autos/Volvo/162083 ... 80_ES.html This car?

That price correct at 6500 Euro?

Gets better.

Paid over £100 for shipping of a engine. They turn up and say it wont fit in the van. Back tomorrow. No calls or emails to tell me this. The seller mailed me.

Diff bushes.... Stuck somewhere awaiting the postal address. Yep all this time.

tossers

Replacing Rachel's door (passenger side) If I measure the driver side front gap it's 6mm all the way down. The best I can make is 6mm at top and 8mm at the bottom. How the hell do I move the door forwards as it's not closing now and hit the plastic trim on rear pillar. The OLD smashed door shut with...