Volvo 480 Club Europe

balto8 wrote: ↑

Thu Sep 16, 2021 9:42 am

I think you should contact Ria Gerritse through facebook. She and her husband, Orlando are the SUPPLIERS from the Netherlands

Hey balto8!
I don't have a Facebook, I feel I have to create something to contact!
do you have a link to their page?

malkontent wrote: ↑

Wed Sep 15, 2021 4:56 pm

Must check in my treasures

Hey malkontent!!!
I would be very grateful for your help!
and then in my seat on the side of the current hole and sticks out the cable!

Hey dcwalker!
Good information, but I don't have such, well, I would buy!
Do you know where you can buy these?

The question arose when reading an article about 3D, who does not tell me where to buy mechanisms from the seats so that they would recline ?! I have them broken and they are not simple, only the wire sticks out for which I pull to deflect the seats!Maybe someone will make a 3D model so that I would...

jifflemon wrote: ↑

Mon Sep 13, 2021 10:37 am

there is also this?

doesn't look like it, but maybe it will do! It is interesting to replace everything regarding the dimming!

jifflemon wrote: ↑

Mon Sep 13, 2021 8:40 am

Spainal wrote: ↑

Wed Sep 08, 2021 12:47 pm

Who is Jeff? you are all talking about him, but I have no idea =))
Introduce me to Jeff urgently =)

Its me

Nice to meet you =))
yes, probably they will do just write that they are slightly larger and hang out, well, they are not delivered to us in Russia and tembolee to Siberia =)

The decision came by chance and suddenly!
The details that I need will be made on a 3D printer, made of special plastic, I will probably order there and see how it goes! Well, this only applies to fasteners, I'm looking for a branch pipe!

Hello everyone who reads! In general, I ran into a problem and have already been working on it for 3 days, I can not find Pistons for adjusting headlights under the number 3412071, we do not want to sell it anywhere, they write that from VAG they say that the mount is dangling, so I want to ask who ...

jifflemon wrote: ↑

Sat Sep 11, 2021 8:33 am

linky

What grabbed my attention? It’s got full leather and AC.
Yes, it looks damp, yes the arches will want attention, but at the moment it’s at sensible money for a good spec.

Here I look at the ads and cry, we have nothing at such prices! It's very expensive to drive to us!

All in my 480 owes me almost £20000 But for the engine and running gear swap, maybe £8500 That's a lot! For such a price you can buy an apartment with 3 rooms from us. And if you transfer it to my salary, I have to work for almost 7 years, there is nothing not to pay for and nothing to eat =))) For...

All in my 480 owes me almost £20000 But for the engine and running gear swap, maybe £8500 That's a lot! For such a price you can buy an apartment with 3 rooms from us. And if you transfer it to my salary, I have to work for almost 7 years, there is nothing not to pay for and nothing to eat =))) For...

Hi Spainal, I admire your enthusiasm! In 2021, I would raise the following two points... 1) Times have changed from the Richmod era 2000-2005. 480's at that time were getting scrapped like disposable paper cups. Every scrap yard in the land had a 440/480 Turbo breaking. The B18FT has some unique en...

Haha “Cranna” is the name of one of our members, Fraser, up in Scotland who has a very fast 480 project on the go. You can read about his adventures here: https://www.volvo-480-europe.org/forum/viewtopic.php?f=23&t=35970 Thanks a lot! I will read it! Well, I've already bought another mod for Mod an...

https://www.ebay.co.uk/itm/Volvo-480-Assorted-Trim-Pieces-/194336482876?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0 Looks like this lot has the washer nozzle that you need... Hey!Thank you very much for half the power! I'm not sure that it is intact ... I have never seen ...

Hi Spainal, I admire your enthusiasm! In 2021, I would raise the following two points... 1) Times have changed from the Richmod era 2000-2005. 480's at that time were getting scrapped like disposable paper cups. Every scrap yard in the land had a 440/480 Turbo breaking. The B18FT has some unique en...

I correspond with Roland in the mail, I will try to find out everything from him! I am ready to make these mods, I have knowledge, and I have a friend who has even more knowledge. If everything works out, I'll let you know! if all the same, God forbid, it happens, I think I can restore the data, wel...

To see the power difference on the mods, have a look at this thread where I posted rolling road results, comparing standard with richmod and roboumod. https://www.volvo-480-europe.org/forum/viewtopic.php?f=23&t=35378&hilit=Lilys+transformation&start=40 Porsche gave the engine 190bhp, so these mods ...

https://www.volvo-480-europe.org/forum/viewtopic.php?f=24&t=36176&p=220879&hilit=Nozzle#p220879 The question is not dismantling or installation, but where to buy such a nozzle, we cannot find such a thing ... Ok I understand, I think Jeff might have one, if not try malkontent in Poland, he seems to...

I've given away my set of Pollux alloys with snow tyres for the 480 last week to a friend who has his 480 as only car. Snow has become rare here due to global warming (at best we've got a mild frost at night and lots of cold rain during daytime) so I'm not bothering to put them on. When it snows, I...

MisterH wrote: ↑

Wed Sep 08, 2021 10:41 am

viewtopic.php?f=24&t=36176&p=220879&hil ... le#p220879

The question is not dismantling or installation, but where to buy such a nozzle, we cannot find such a thing ...