depends where snapped off, if just the round knobbly sticky out bit then clean it up and add a round section of bolt?
Search found 1499 matches
- Thu Jul 04, 2019 11:45 am
- Forum: Parts, Accessories & Brochures
- Topic: Headlight hinge brackets
- Replies: 4
- Views: 1492
- Thu Jul 04, 2019 11:43 am
- Forum: Parts, Accessories & Brochures
- Topic: B20F Engine (+ poss engine loom and ECU)
- Replies: 5
- Views: 1351
Re: B20F Engine (+ poss engine loom and ECU)
Fraser What would you charge for storage of said engine etc? now that I have a pair of 480 and both have high mileage a spare could be useful:-) ditto gearbox in red one is getting 'dour' to engage first/second I have some room under the freezer now that the Regal engine/box have left for new owner,...
- Thu Jul 04, 2019 11:34 am
- Forum: Electrical system (30)
- Topic: ECU and ignition relay
- Replies: 29
- Views: 9810
Re: ECU and ignition relay
Have now soldered a jumper wire between the burnt traces, and no difference. Relays still clack and no spark generated, my suspicion is it's damaged other components that aren't visible, or it's a multilayer PCB (Difficult to tell held up to the light) and other traces have been damaged. Defo on th...
- Wed Jul 03, 2019 11:52 am
- Forum: Howto manuals
- Topic: Instrument / Rev Counter / Speedo Repair
- Replies: 17
- Views: 22101
Re: Instrument / Rev Counter / Speedo Repair
is there a quick way to 'wind on' the odometer? I suspect the tiny cog has died :-( but as I have a spare cluster I will set it to about the same mileage before doing a swap I only noticed this week that miles weren't increasing and SWAMBO hadn't complained about 'speedo' not working since she'd fil...
- Tue Jul 02, 2019 5:08 pm
- Forum: Electrical system (30)
- Topic: ECU and ignition relay
- Replies: 29
- Views: 9810
Re: ECU and ignition relay
Was also thinking along the same lines with a can of easy start into the intake, see if it coughs to give a sign of life to see if fuel is there or not. I hate that stuff - its WAY too flammable has has been known to knock out the upper rings; Which then makes starting harder, so you use more easys...
- Tue Jul 02, 2019 11:44 am
- Forum: The secret life of a 480 owner...
- Topic: Oooops I did it again....
- Replies: 73
- Views: 19649
Re: Oooops I did it again....
you mean is it red? = OKjamescarruthers wrote: ↑Tue Jul 02, 2019 10:14 amWell done, you nutter!
What colour is the auto box fluid?
is it brown? = shagged
bit odd really having a 'turbo' with an auto? I'd have thought you'd buy a TURBO for the fun of driving etc, auto takes away the fun, but I guess you could then keep the revs 'in zone' ?
- Tue Jul 02, 2019 11:41 am
- Forum: Electrical system (30)
- Topic: ECU and ignition relay
- Replies: 29
- Views: 9810
Re: ECU and ignition relay
have you checked the crank sensor is working? need to check it isn't open circuit at sensor (unplug at bell housing) and confirm 'correct resistance' which I do have a note of, not at work though :-) then plug it in & out a few times, might be a dicky connection? it can be traced back at the othe r...
- Tue Jul 02, 2019 11:33 am
- Forum: Electrical system (30)
- Topic: Horns
- Replies: 8
- Views: 2389
Re: Horns
Knew it! Excellent, but will any 335Hz or 400Hz do? Excuse my ignorance...! It seems these two frequencies do come as a pair (although not dual connector): https://www.ebay.co.uk/i/163719488439?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=163719488439&targetid=595627705353&devic...
- Mon Jul 01, 2019 8:20 pm
- Forum: The secret life of a 480 owner...
- Topic: Oooops I did it again....
- Replies: 73
- Views: 19649
Re: Oooops I did it again....
two's company , three's a crowd? at least you will be well practised in keeping them running, always a spare to circulate to front of the queue :wink: I'd be happy if i could have space to easily work around the car, but a bit limited to one side only at a time and fighting with the bunper bolts on ...
- Mon Jul 01, 2019 6:14 pm
- Forum: General Discussions
- Topic: Blinky 51/480
- Replies: 437
- Views: 224718
Re: Blinky 51/480
Have you got plan for refitting the struts? I wish I had disconnected a few more parts. I would consider draining the gearbox oil and removing the driveshaft gaiter as it is easy to pull the shaft away from the gaiter and lose your oil, which is messy and expensive. I seem to have mangaed to swap th...
- Mon Jun 24, 2019 5:40 pm
- Forum: Engine (20)
- Topic: Timing belt change 1994 2.0 B20F
- Replies: 2
- Views: 2765
Re: Timing belt change 1994 2.0 B20F
When undoing teh front nut on the crankshaft b eprepared for it to be 'oh my goodness'. I used a wheel wrench type as it had a slide out extension and was six sided so giving a nice secure fit!! (actually had it modifed by teh welders at work so it was a right angle to give a better 'pull' and you w...
- Sun Jun 23, 2019 3:56 pm
- Forum: General Discussions
- Topic: Blinky 51/480
- Replies: 437
- Views: 224718
Re: Blinky 51/480
I used ALDI metal paint on the slls of the SS1 and various parts of 480 suspension at rear and seems to be pretty good, MUCH cheaper than Hmmerite and can get it in black, green & white, ideally black but I had a tin of green for garden furniture so green will be used
- Fri Jun 21, 2019 12:03 pm
- Forum: The secret life of a 480 owner...
- Topic: So, today was the day...
- Replies: 244
- Views: 94641
Re: So, today was the day...
Was also a tad annoyed to discover that the brake disc dust shield is pressed on, rather than bolted on. Was hoping to blast and paint that along with the spring tops, but will have to attempt it in-situ :cry: mine were pressed on by Volvo, fell off in my hands :-) made new from 1/16 ally plate and...
- Wed Jun 19, 2019 8:38 pm
- Forum: The secret life of a 480 owner...
- Topic: So, today was the day...
- Replies: 244
- Views: 94641
Re: So, today was the day...
for what it's worth I try and grab the edge of the spring pan as well, gives more of spring within the compressors . and I make a point of doing it in middle of garden pointing away from house window (even been known to tie the SS1 spring to something as they are double the poundage as 'inboard' wit...
- Wed Jun 19, 2019 11:42 am
- Forum: Cars For Sale / Wanted
- Topic: turbo to repair or break anyone ?
- Replies: 5
- Views: 2042
- Wed Jun 19, 2019 11:36 am
- Forum: The secret life of a 480 owner...
- Topic: 1990 Turbo Auto - VOL 480T
- Replies: 170
- Views: 47023
Re: 1990 Turbo Auto - Fox
Funny, the info centre going haywire, that is what happens sometimes in my car, too. Either it displays everything, or it freezes (display stuck), or it remains blank. And it always comes back to life. Can't seem to find out why, because it never happens when I am testing the instrument cluster in ...
- Wed Jun 19, 2019 11:35 am
- Forum: Cars For Sale / Wanted
- Topic: turbo to repair or break anyone ?
- Replies: 5
- Views: 2042
Re: turbo to repair or break anyone ?
cheap rear clusters ,
but a shame to break if all it needs is a starter, windscreen is £80 excess
but a shame to break if all it needs is a starter, windscreen is £80 excess
- Mon Jun 17, 2019 8:30 pm
- Forum: The secret life of a 480 owner...
- Topic: So, today was the day...
- Replies: 244
- Views: 94641
Re: So, today was the day...
only one of the images is visible :-( but it does show a nice shiney subframe :-) And now fixed! (took the links from the photo's, not the photos in the shared album!) Yep all visible I think that's where I'd gone wrong as well so re-loaded the phots straight to the shared album'. . . . . I didn't ...
- Mon Jun 17, 2019 11:46 am
- Forum: The secret life of a 480 owner...
- Topic: So, today was the day...
- Replies: 244
- Views: 94641
Re: So, today was the day...
only one of the images is visible
but it does show a nice shiney subframe
but it does show a nice shiney subframe
- Mon Jun 17, 2019 11:44 am
- Forum: General Discussions
- Topic: Who to use for image uploads now discussion?
- Replies: 23
- Views: 8381
Re: Who to use for image uploads now discussion?
The other thing to do when testing posts, have a “incognito/in private” session of your browser open. It means your viewing the post as a normal user, so in that browser session, your not logged into your google account. good thinking i think I'll reload the photo onto Google Photos straight into m...