Volvo 480 Club Europe

I dont think the icv is to blame, the idle is rock steady, and the car doesnt hesitate at all. i think a dying lambda might be to blame, cleaned the icv anyway but made no diffrence. unplugging the lambda sensor cable also made no diffrence.

Ok well finaly got the 440 through the mot (thanks to the suspension collapsing on the way first time!). However had the emissions results and well, it only just scraped it's way through. Fast idle test Engine speed 2500-3000 CO 0.04% HC 0ppm (doesnt sound right to me!) Lambda 1.030 (bang on the lim...

Ok having read a couple of post here, i belive the wastegate on my 440 turbo might be on deaths door, when the turbo comes off boost (when you let off, dont know correct term) the waste gate makes a rather loud fluttering noise. the 440 is bog standard and is an auto. The engine has a idle issue as ...

Ah crud, new hubs are like rocking horse poo round here, theres only one braeker with a 400 series in this area (for 50 miles around) and it isnt an abs one, looks like im just going to have to get friendly with my BFH again. Reminds me of my suzuki sj413 days lol! As for sensors anywhere recomended...

Ok well can confirm it is sensors that are shot! front left senosor is snapped! Tried to remove the sensor but only the plasitic parts came off, the metal holder is still wedged in the hub and refuses to be removed! anyone one got an idea how to get this out? Also where can i obtain new sensors? (wi...

Ok so ive made a right balls up! got a new (good used) ABS controler for my 440, only to find my 440 has bloody tracs on it! nuts new kit wont fit! So how do i strip down my old unit, so i can reapir the buggerd solinods/transistors that are stopping my abs from working! can the abs ecu from a non t...

Can anyone tell me where the sensor is on a 440 turbo auto, spedo worked fine before i had to change the suspension struts (what a c**t of a job!) now it doesnt wortk at all, suspect ive bust / disconected the sensor.

Thanks in advance
Bryan

Ok been looking on the web for 6 hours and have managed to find this! :- :crazy: The Teves MK IV system The system has 2, 3 or 4 pairs of valves. Each pair consists of one inlet valve and one outlet valve. An inlet valve is positioned between the main brake cylinder and a wheel cylinder. It is opene...

Ok first off hello all, a newbie here trying to fix there volvo. I know i dont have a 480 (ive got a 440 turbo) but hope you guys will be able to help me with the same family of car. My ABS is nackerd (failed my mot for it) have been able to read faukt codes and got the following :- 4-1-1 Inlet valv...