Volvo 480 Club Europe

you would probably get away with usin the 480 fuel system - just bolt on the 480 flywheel for correct crank sensor trigger partern

It's the T4 engine I'm interested in tbh. As long as it will bolt up I'll be happy.

It's only the 1.8 GDi thats a mitsi engine

So does that mean a S40 T4 engien would bolt onto a 480 turbo gearbox?

Has anyone evr fitted a S40 engine?

Cheers.

I'll post some pics when the conversion is done. I just finished getting it running on gas injection today so all I'll need to do when the turbo goes on is a remap.

Thaanks for that Tobi. The engine is installed in a volvo 340 and does not use any of the 400 series engine managment because it is running only on LPG. I am fitting multi point gas injection as LPG mixer systems and turbo's do not go together very well. I had asumed that the extra bolts were there ...

Has any turbo's the B20F? If have a complete turbo and manifold from a Turbo engine to use. I have noticed that the Turbo manifold has more bolt holes through it and fouls the temp sensor in the head. Where is the temp sensor normaly in the turbo engine? I'm having the head rebuilt and going to gut ...

Yes, I have. I have larger valves in and a reprofiled cam, and unfortunately the car runs like a bag of spanners. This is partially down to the cam reprofilling whihc has introduced some overrun (meaning the gasses are momentarilly forced the wrong way) Can't tell you what profile it was shaped to,...

Doesnt look like I'll get one of these manifolds so does anyone know of acompany that make twin webber manifolds for this engine?

Many thanks

Dai

Thanks for the help on the cam. But it has given me a few more questions. Does anyone know the original profiles? Also what valves are available. I will need to increase the valve size and improve the inlet/exhaust track to get the most of the cam. Has anyone hade this kinda work done on there engin...

Hi I'm looking for a Inlet manifold like this http://i3.photobucket.com/albums/y82/classicswede/inletman.jpg Any similar manifold would do as long as the throttle body does not sit at the end as it is to replace this bodge. http://i3.photobucket.com/albums/y82/classicswede/IMGP0691.jpg Thanks Dai

The ecu is an OMVL single point lpg fuel ecu. It is fully programable for fueling and is driven off the lambda rpm and tps. The engine is running LPG only so I have slotted the crank position sensor to advance the timing. I have a spare head that I'm getting skimmed to raise the CR and hopfully that...

Hi I have a B20f installed in my volvo 340 and am looking to get a bit more out of it yet. I already have a good air filter , a 2" sports exhaust and a fully mapabale ecu. What I need is a hotter cam. I don't want to go mad with it just a little bit more. Where is the best place to get one from? Has...