Search found 59 matches
- Sat Jun 30, 2012 9:05 pm
- Forum: General Discussions
- Topic: Another Dies.....
- Replies: 4
- Views: 1863
Re: Another Dies.....
That little beaut of an engine is gonna have a nice head rebuild, porting and polish cam regrind and bigger valves, (Cannot wait to get my 480 back on the road and join in on the meets).... Only a 480 can put a real smile on your face!!
- Sun May 13, 2012 9:02 pm
- Forum: Styling
- Topic: Side skirts
- Replies: 1
- Views: 4446
Side skirts
Hi guys,
Just getting back into the 480 and doing it up, i am wondering is there any bolt on side skirts that we can get i.e i know the old Maestro kit used to fit, if i remember correctly, does anybody have any other ideas?
Regards
Just getting back into the 480 and doing it up, i am wondering is there any bolt on side skirts that we can get i.e i know the old Maestro kit used to fit, if i remember correctly, does anybody have any other ideas?
Regards
- Sun Feb 05, 2012 3:24 pm
- Forum: Tuning And Tweaking
- Topic: engine specific ecu
- Replies: 3
- Views: 7026
- Sat Feb 04, 2012 9:00 pm
- Forum: Tuning And Tweaking
- Topic: engine specific ecu
- Replies: 3
- Views: 7026
engine specific ecu
Hi,
I am gonna go ott on the b18e engine and I am wondering if anyone in the manchester area will Taylor an evidence for the mods taking place??
I am gonna go ott on the b18e engine and I am wondering if anyone in the manchester area will Taylor an evidence for the mods taking place??
- Sat Feb 04, 2012 8:47 pm
- Forum: Tuning And Tweaking
- Topic: ECU Modification
- Replies: 74
- Views: 120733
Re: ECU Modification
Any consideration for a b18e n/a?
- Mon Oct 10, 2011 2:15 pm
- Forum: Power transmission (40)
- Topic: Clutch Question
- Replies: 7
- Views: 5126
Re: Clutch Question
Ok i know i am reviving something a couple of months down the line, but as the 480 is now off the road i can confirm i did have the turbo clutch put on it and what a difference it was, wheel spinning everywhere but it was much fun........ so yes on a standard 1.7 N/A you can fit the turbo clutch whi...
- Wed Oct 05, 2011 7:35 am
- Forum: Parts, Accessories & Brochures
- Topic: WANTED: Rear bumper cover
- Replies: 1
- Views: 966
Re: WANTED: Rear bumper cover
Give Glasgow Jim or laser owl a shout (laser owl is stripping one now)
- Tue Sep 13, 2011 8:29 pm
- Forum: Cars For Sale / Wanted
- Topic: FOR SALE: White 480 Turbo
- Replies: 17
- Views: 8771
Re: FOR SALE: White 480 Turbo
How much mot n tax is on it and where is it? how much??
- Tue Sep 13, 2011 8:09 pm
- Forum: Cars For Sale / Wanted
- Topic: Volvo 480 Collection limited Edition for sale
- Replies: 6
- Views: 2420
Re: Volvo 480 Collection limited Edition for sale
Where is the vehicle how much mot n tax n how much u selling it for??
- Sun Sep 04, 2011 12:44 pm
- Forum: Parts, Accessories & Brochures
- Topic: VOlvo 480 Top end
- Replies: 3
- Views: 1236
Re: VOlvo 480 Top end
Awesome glad you still have that, dropped u a message anyway, the Plan is now that I have moved and have a garage, is to strip and rebuild my 480 and make it a top spec n/a, I would not have a clue how much to offer for the head??? Like I say not in a rush to get it but the car is comming off in the...
- Sat Sep 03, 2011 10:29 pm
- Forum: Parts, Accessories & Brochures
- Topic: VOlvo 480 Top end
- Replies: 3
- Views: 1236
VOlvo 480 Top end
Anyone have a cylinder head for a 480 B18E?? Needs to be in working condition.... No rush but will need in the near future.
Thanks
Thanks
- Fri Apr 29, 2011 3:56 pm
- Forum: Power transmission (40)
- Topic: Clutch Question
- Replies: 7
- Views: 5126
Re: Clutch Question
Just thought i would let everyone know it will fit as the holes to the flywheel and the pressure plate match, assumeably the driveshaft will match so the plate will match, seems like a sterdier and better made clutch as well, will post up in a couple of weeks the difference and hopefully it will be ...
- Sat Apr 23, 2011 7:25 pm
- Forum: Power transmission (40)
- Topic: Clutch Question
- Replies: 7
- Views: 5126
Re: Clutch Question
From what i can make out if the flywheel accepts a 200mm clutch then any other 480 200mm clutch will fit anyway i am buying it and going to match it up to my old one if it matches it matches if not i'll send it back but i post up my results online theoretically it would be stronger clutch than the N...
- Wed Apr 20, 2011 10:56 pm
- Forum: Power transmission (40)
- Topic: Clutch Question
- Replies: 7
- Views: 5126
Re: Clutch Question
Alrite no reply but i am assuming that the turbo clutch would be a direct replacement for the n/a correct me if I am wrong?
Thanks
Thanks
- Sun Apr 17, 2011 4:35 pm
- Forum: Power transmission (40)
- Topic: Clutch Question
- Replies: 7
- Views: 5126
Clutch Question
In a bid to uprate my clutch as the amount of torque my N/A B18E is chucking out is rediculous and causing major slip, i am now thinking of getting a turbo LUK clutch and have it thrown in.. now the theory is sound but is it pratical? would a standard turbo clutch go straight in with no modification...
- Fri Apr 15, 2011 8:08 am
- Forum: Parts, Accessories & Brochures
- Topic: Clutch Cable
- Replies: 5
- Views: 1336
Re: Clutch Cable
Cheers mate
- Tue Apr 12, 2011 9:21 pm
- Forum: Parts, Accessories & Brochures
- Topic: Clutch Cable
- Replies: 5
- Views: 1336
Re: Clutch Cable
Anyone???
- Thu Mar 24, 2011 10:52 pm
- Forum: Parts, Accessories & Brochures
- Topic: FOR SALE - 17in Fox Evo Alloys - £30
- Replies: 14
- Views: 4211
Re: FOR SALE - 17in Fox Evo Alloys - £30
If not sold and you want em shiftin i'll av em, get em this weekend??
- Thu Mar 24, 2011 10:48 am
- Forum: Electrical system (30)
- Topic: Digital Speedometer conversion
- Replies: 2
- Views: 1183
Re: Digital Speedometer conversion
Hi mate, av had a bash at that and been trying to find some info over the past few days so far cannot find anything and tbh wouldn't know where to start on doing it the task....
Kane
Kane
- Wed Mar 23, 2011 10:06 pm
- Forum: Electrical system (30)
- Topic: Digital Speedometer conversion
- Replies: 2
- Views: 1183
Digital Speedometer conversion
As it says above has anyone tried it?? What kit did they use n how easy was it???