Check the earths near the alternator in the mounting where the engine shock absorber is.
There must be three wires in the bottom right screw from that mounting, one of them is the earth for the info center.
I had the same problem in mine, the terminal was damaged, replaced it and it works now.
Search found 39 matches
- Sun Jun 14, 2009 12:03 am
- Forum: Electrical system (30)
- Topic: dead infocentre
- Replies: 23
- Views: 9883
- Fri May 08, 2009 8:17 am
- Forum: Power transmission (40)
- Topic: M56 Gearbox - what is the equivalent Renault one?
- Replies: 3
- Views: 2788
- Thu May 07, 2009 2:33 pm
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
finished rebuilding engine! Started first time, it now idles, runs smooth, i am amazed! All problems disapeared. Turned out i had 3 valvesprings broken, worn out valve guides and piston rings. Cleaned every sensor, changed every seal, piston rings, big end and main bearings, new valve guides, reface...
- Thu May 07, 2009 1:30 pm
- Forum: Power transmission (40)
- Topic: M56 Gearbox - what is the equivalent Renault one?
- Replies: 3
- Views: 2788
M56 Gearbox - what is the equivalent Renault one?
Trying to find the equivalent for the M56 gearbox from renault. Is it the JB3 or JC5? The reason i am asking this is because i am looking for proper gearbox oil, the thing is that Volvo sells 3.4 liters and Renault sells by the liter. If it is a JC5 it will take 3.1 and if it is a JB3 it will take 3...
- Fri Feb 27, 2009 5:21 pm
- Forum: Engine (20)
- Topic: Injectors
- Replies: 4
- Views: 2703
Hi, From what we have discovered, B18E uses low impedance injectors and B18FP uses hifh impedance ones. Basically if you use low impedance injectors you can toast the ECU, for this you would need a set of resistors i believe (don't know exactly how and where). I'm looking for injectors for my B18FP ...
- Tue Feb 24, 2009 10:15 pm
- Forum: Engine (20)
- Topic: Crankcase Ventilation
- Replies: 3
- Views: 1456
- Tue Feb 24, 2009 9:25 pm
- Forum: Engine (20)
- Topic: Crankcase Ventilation
- Replies: 3
- Views: 1456
- Tue Feb 24, 2009 7:53 pm
- Forum: Engine (20)
- Topic: Crankcase Ventilation
- Replies: 3
- Views: 1456
Crankcase Ventilation
Hi guys, my simple question is:
Is it possible to remove the Crankshaft ventilation? What are the pros and cons? How can it be done?
Best regards
Is it possible to remove the Crankshaft ventilation? What are the pros and cons? How can it be done?
Best regards
- Tue Feb 24, 2009 12:21 pm
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
- Mon Feb 23, 2009 2:06 pm
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
Still one thing i can't understand... 0280150130 injectors are low impedance ones, but injectors found on vehicle were high impedance... Can the ECU cope with low impedance? Why were the injectors fitted on the car high impedance ones? Does anybody have some pictures taken from B18FP engine injector...
- Wed Feb 18, 2009 2:21 pm
- Forum: Engine (20)
- Topic: Injectors
- Replies: 4
- Views: 2703
- Mon Feb 16, 2009 9:32 pm
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
- Mon Feb 16, 2009 6:20 pm
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
- Mon Feb 16, 2009 2:15 pm
- Forum: Tuning And Tweaking
- Topic: 1.8 N/A
- Replies: 10
- Views: 4622
- Mon Feb 16, 2009 2:12 pm
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
More news: Got myself a trashed 440 complete turbo engine for free. :D Took the cylinder head out, it 's the same as the one in the ES, except it has bigger valves (not in diameter) cause they are sodium filled, ports are the same size and shape aswell. Meanwhile i also realised that the injector ra...
- Fri Feb 13, 2009 12:36 am
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
Engine code is B18EP, at least its the number engraved on the engine block, but has lambda sensor and 1990 year so should be B18F!!! From what i have discovered so far, the injectors i have should be these ones: bosch reference 0280150740 (high impedance, 156cc/min) B18F (3343070). see link: http://...
- Thu Feb 12, 2009 10:23 pm
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
Measured the injector impedance on all four injectors and the values i got were ranged between 14.3 and 14.6 ohms, so high impedance injectors. From this i can conclude one of the following: - either it was running on injectors it shouldn't, or; - injectors are correct but information on volvo parts...
- Mon Feb 09, 2009 9:24 pm
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
- Mon Feb 02, 2009 12:17 am
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
Guys, i'm really lost here, i need some help! Removed cylinder head, apart from having two broken valve springs which i have no idea if it is a common fault on 480's, i m also having trouble finding out some information about the injectors!!! All the injectors i have are black top, they have no refe...
- Wed Jan 28, 2009 10:31 am
- Forum: Engine (20)
- Topic: Bendix Deka Injectors
- Replies: 24
- Views: 8520
Thanks Ettore, They are all black. Can't seem to find any information on the meaning of the black bendix injector, flow etc... Are Bosch injectores compatible with bendix ones?? It's an 1990 B18FP engine, so has bendix fenix fuel injection system. I've been looking in ebay and not sure if, for insta...