Search found 64 matches
- Wed Jun 15, 2011 8:11 pm
- Forum: Engine (20)
- Topic: Injectors b18ft
- Replies: 2
- Views: 1863
Re: Injectors b18ft
u can upgrade them to 227cc , doesn't lean out when on boost
- Sat Aug 07, 2010 8:21 pm
- Forum: Engine (20)
- Topic: car wont run tick over or rev up
- Replies: 23
- Views: 4618
Re: car wont run tick over or rev up
ha okay..
did you replace the relais? mine were clicking to, but were rusty as hell. after replacing them with new ones
did you replace the relais? mine were clicking to, but were rusty as hell. after replacing them with new ones
- Sat Aug 07, 2010 6:22 pm
- Forum: Engine (20)
- Topic: car wont run tick over or rev up
- Replies: 23
- Views: 4618
Re: car wont run tick over or rev up
do you have the correct loom with the engine?
200mm clutch, 3 wires from TDC-sensor
225mm clutch, 2 wires
200mm clutch, 3 wires from TDC-sensor
225mm clutch, 2 wires
- Thu Aug 05, 2010 11:21 am
- Forum: Wheel suspension and Steering (60)
- Topic: coilovers?
- Replies: 22
- Views: 23050
Re: coilovers?
i have coilovers from a WV golf mk1 on a renault 5, exactly the same offset. so if there is nothing for these volvo's you can look @ other makes, keeping the weight of the used car in mind . It was a lot of research but it paid off, the car can be slammed on the tarmac now
- Mon Aug 02, 2010 8:04 pm
- Forum: Tuning And Tweaking
- Topic: can i uses these injectors
- Replies: 6
- Views: 3500
Re: can i uses these injectors
hi i use volvo 740 2.3 injectors atm they are 227 cc
0280150749
0280150749
- Mon Aug 02, 2010 4:45 pm
- Forum: Tuning And Tweaking
- Topic: Super Rich Mod
- Replies: 8
- Views: 4880
Re: Super Rich Mod
already found it , original solenoid is going to be replaced
- Sun Aug 01, 2010 7:53 pm
- Forum: Engine (20)
- Topic: car wont run tick over or rev up
- Replies: 23
- Views: 4618
Re: car wont run tick over or rev up
does it run on brake cleaner? i had ones the same problem, turned out to be the 2 relais at the end of the loom, they were all brown of corrosion.
- Sun Aug 01, 2010 7:45 pm
- Forum: Tuning And Tweaking
- Topic: can i uses these injectors
- Replies: 6
- Views: 3500
- Sun Aug 01, 2010 12:21 pm
- Forum: Tuning And Tweaking
- Topic: Super Rich Mod
- Replies: 8
- Views: 4880
Re: Super Rich Mod
i haven't installed the super mod yet, but i have a little question about this . do i have to instal the turbo solenoid to get it working properly? or can i leave it as it is ( directly from turbo to actuator).
gtz sieger
gtz sieger
- Wed Jun 09, 2010 6:06 pm
- Forum: Engine (20)
- Topic: 480 2.0l throttle body
- Replies: 6
- Views: 1688
Re: 480 2.0l throttle body
i will look for the Number.
- Tue Jun 08, 2010 6:35 pm
- Forum: Tuning And Tweaking
- Topic: Super Rich Mod
- Replies: 8
- Views: 4880
Re: Super Rich Mod
photo's
- Mon Jun 07, 2010 4:07 pm
- Forum: Tuning And Tweaking
- Topic: Super Rich Mod
- Replies: 8
- Views: 4880
Re: Super Rich Mod
I opened the EZK and saw the chip with the text "standard cam" .
What should i do stick, with the standard cam or fit the "E" cam. Is richard still reading on the forum??
Sieger
What should i do stick, with the standard cam or fit the "E" cam. Is richard still reading on the forum??
Sieger
- Sun Jun 06, 2010 8:31 pm
- Forum: Tuning And Tweaking
- Topic: T25 upgrade
- Replies: 1
- Views: 1968
Re: T25 upgrade
every turbo is different , so on one turbo it will fit perfect and the other won't fit at all.
actuator doesn't have te change and a FPR ist needed also
actuator doesn't have te change and a FPR ist needed also
- Fri Jun 04, 2010 10:06 am
- Forum: Tuning And Tweaking
- Topic: Boost problem !!!
- Replies: 6
- Views: 2617
Re: Boost problem !!!
Hi
i had the same problem a while ago, check if the flap of the wastegate is still in place (downpipe has to go off for this)
grtz sieger
i had the same problem a while ago, check if the flap of the wastegate is still in place (downpipe has to go off for this)
grtz sieger
- Wed Jun 02, 2010 7:00 pm
- Forum: Tuning And Tweaking
- Topic: Super Rich Mod
- Replies: 8
- Views: 4880
Re: Super Rich Mod
the air mass meter , has an build in potentiometer by richard. will see what it will bring. the clutch will be an 200 mm paddle clutch. i will fit the stuff with the 230 cc injectors. i opend the ezk and discoverd a 3 bar map sensor and a chip made by richard. with my new motorblock in place i will ...
- Sun May 30, 2010 2:33 pm
- Forum: Engine (20)
- Topic: 480 2.0l throttle body
- Replies: 6
- Views: 1688
Re: 480 2.0l throttle body
you also can use 1 from an renault 2.0 liter
- Wed May 26, 2010 7:22 pm
- Forum: Tuning And Tweaking
- Topic: Super Rich Mod
- Replies: 8
- Views: 4880
Super Rich Mod
What kind of power can i aspect from this,
315 cc injectors
the 'E' cam
TDo4 turbo turbo is max rated for 1,7 BAR (25 psi)
60 mm throttlebody
Are there any Dyno sheets from this Mod?
315 cc injectors
the 'E' cam
TDo4 turbo turbo is max rated for 1,7 BAR (25 psi)
60 mm throttlebody
Are there any Dyno sheets from this Mod?
- Wed May 26, 2010 7:17 pm
- Forum: Tuning And Tweaking
- Topic: Megasquirt B18FT
- Replies: 112
- Views: 94544
Re: Megasquirt B18FT
I have bought the super mod , so the Megasquirt is up for sale
- Sat Feb 27, 2010 6:58 pm
- Forum: Tuning And Tweaking
- Topic: Megasquirt B18FT
- Replies: 112
- Views: 94544
Re: Megasquirt B18FT
Hi
i'm playing a little with the megasquirt, but i did not get it to run on my engine. i installed the IAT changed the wireing as discribed, only thing i haven't done is wire the fuel pump (it rund apart from the MS) is this the problem?
i'm playing a little with the megasquirt, but i did not get it to run on my engine. i installed the IAT changed the wireing as discribed, only thing i haven't done is wire the fuel pump (it rund apart from the MS) is this the problem?
- Wed Feb 10, 2010 12:41 pm
- Forum: Parts, Accessories & Brochures
- Topic: wanted uprated turbo and actuator, injectors
- Replies: 3
- Views: 977
Re: wanted uprated turbo and actuator, injectors
in a month or so i have 230 cc injectos for sale , price will be 50 euro's