Hi!
Do you have the radio electric antenna?
Thanks
Search found 9 matches
- Mon Dec 07, 2020 5:27 pm
- Forum: Parts, Accessories & Brochures
- Topic: 1989 ES 1.7 BREAKING FOR PARTS
- Replies: 26
- Views: 3297
- Tue Mar 17, 2020 12:04 pm
- Forum: Cars For Sale / Wanted
- Topic: Odometer motor
- Replies: 3
- Views: 1307
Re: Odometer motor
Thanks for your reply brinkie. I have some knowledge in electronics, and I have tested the board in the workbench. The board is good and it gives the signal to the motor to rotate. The motor has two coils, and one is in open circuit, so that's why the motor doesn't run. I would be very happy if you ...
- Mon Mar 16, 2020 9:06 pm
- Forum: Cars For Sale / Wanted
- Topic: Odometer motor
- Replies: 3
- Views: 1307
Odometer motor
My Volvo 480 stoped to count the kilometers (it shows the speed, but the odometer doesn't run). I have already repalced the cog wheels but it still doesn't count. After lots of tests, I have found out that the odometer motor doesn't run (one coil is broken). https://i.ibb.co/80VDkTF/hCKM3cV.png" Doe...
- Sat Dec 07, 2019 8:32 pm
- Forum: Tuning And Tweaking
- Topic: Boost
- Replies: 4
- Views: 5730
Re: Boost
Regarding the boost valve, I would like to know how it works.
The valve has three hoses connected, one goes to the wastegate actuator, but I don't know where the other two hoses goes to. The valve also has an electrical plug that I think it connects to the ECU.
The valve has three hoses connected, one goes to the wastegate actuator, but I don't know where the other two hoses goes to. The valve also has an electrical plug that I think it connects to the ECU.
- Fri Nov 08, 2019 11:06 pm
- Forum: Electrical system (30)
- Topic: CEM Mark 1 Pinout
- Replies: 9
- Views: 4007
Re: CEM Mark 1 Pinout
Does anyone know the reference and where to buy of the relays that are on the CEM.
I would like to buy the two types for spares.
Thanks
I would like to buy the two types for spares.
Thanks
- Wed Oct 30, 2019 10:51 pm
- Forum: Electrical system (30)
- Topic: CEM Mark 1 Pinout
- Replies: 9
- Views: 4007
Re: CEM Mark 1 Pinout
Thank you for you awnser brinkie. Do you know what is RM bridge in the board (images bellow)? Mine has a pin broke. Should I solder it? https://i.postimg.cc/6pnRPKZZ/CEM1.jpg https://i.postimg.cc/k5ySnyfX/CEM2.jpg I also would like to know if it is possible to test the board in workbench? Thanks
- Tue Oct 29, 2019 1:17 am
- Forum: Electrical system (30)
- Topic: CEM Mark 1 Pinout
- Replies: 9
- Views: 4007
CEM Mark 1 Pinout
Hello, Does anyone has the pinout/wiring diagram/schematics of a CEM Mark 1 (5 DK 004 696-01) for a 1990 Volvo 480? The electrical diagram that is avaiable to download only have the CEM Mark 3, and I would like the diagram for the mark 1, because my CEM has some problems and I would like to repair i...
- Wed Oct 23, 2019 12:24 am
- Forum: Body and Interior (80)
- Topic: Plastic Clips for Door Card
- Replies: 19
- Views: 6432
Re: Plastic Clips for Door Card
are you sure they are missing?, assuming that those being requested are those along bottom edge of the door?? I just discovered that mine were NOT missing as the later doors are held on with 'hidden' clips that might have 'disbonded' from the pressed chip-board inner . .. . . My '94 car has both th...
- Tue Oct 22, 2019 5:05 pm
- Forum: Body and Interior (80)
- Topic: Plastic Clips for Door Card
- Replies: 19
- Views: 6432
Re: Plastic Clips for Door Card
I need some plastic door clips.
Do you know someone that sells it?
Thanks
Do you know someone that sells it?
Thanks