Search found 1492 matches
- Mon Mar 25, 2024 9:52 am
- Forum: Body and Interior (80)
- Topic: Coat hangers
- Replies: 8
- Views: 286
Re: Coat hangers
PM replied. Thanks a lot Marek! Should be reproduced though. I have no experience with molding and silicone and stuff, but would take 2 sets just to send it out to someone with reproduction skills As Jeff linked to the hard plastic part is a doddle to print in 3D but the 'soft part' is a bummer as ...
- Mon Mar 25, 2024 9:47 am
- Forum: Electrical system (30)
- Topic: LED headlamps
- Replies: 3
- Views: 184
Re: LED headlamps
I admire the thought & effort, but given the limited miles the 480 now covers I'll just stick with the existing bulbs as I think i have only ever replaced ONE headlight bulb over the last ten or fifteen years, :hopping: maybe been lucky but it was the 'high bright' DRL that used to get chewed throug...
- Thu Mar 21, 2024 6:03 pm
- Forum: General Discussions
- Topic: Power Steering Hoses
- Replies: 7
- Views: 215
Re: Power Steering Hoses
Just read this again and maybe I've misunderstood something. I thought the 10mm thread was to go directlu into the rack. Now I'm wondering the the rack has permanent 10mm steel pipes which I will need to use a compression joint to join onto the hose, hence a 3/8 hose end to a 3/8-10mm thread adapte...
- Tue Mar 19, 2024 12:54 pm
- Forum: General Discussions
- Topic: Power Steering Hoses
- Replies: 7
- Views: 215
Re: Power Steering Hoses
I checked the pump I have here and it is M16 thread so an option is to convert from rigid-flexible-rigid to flexible-rigid. With banjo at pump if you can arrange the flexible to go horizontal towards battery and then down under sump, or a right angle fitting, make sure it is the style that 'spins' t...
- Mon Mar 18, 2024 9:11 pm
- Forum: General Discussions
- Topic: Power Steering Hoses
- Replies: 7
- Views: 215
Re: Power Steering Hoses
On mine, the metal pipe is corroded as it goes into the top of the pump. Not sure of the thread but the fitting is 17mm AF. I assume this is the pressure line as the other one is rubber hose with a crimp. Did you have to flare the stainless steel pipe? I have brake pipe flaring tools but nothing la...
- Mon Mar 18, 2024 8:31 pm
- Forum: General Discussions
- Topic: Power Steering Hoses
- Replies: 7
- Views: 215
Re: Power Steering Hoses
Chris I sourced the FLEXIBLE sections from 'Hydraulic mega store', about £25 for the flexible and then similar for various fittings they also supply steel tube and all the fittings, all at reasonable price, if you are OK to DIY :wink: I had planned to fit these to some RIGID STAINLESS pipe a friend ...
- Sun Mar 17, 2024 8:02 pm
- Forum: The secret life of a 480 owner...
- Topic: Welcome Seymour
- Replies: 33
- Views: 41915
Re: Welcome Seymour
aye 670 miles it would be cheaper to hire a taxi? :shock: I got advisory for 'brake lines covered in grease, or similar', I guess I'll have to bite the bullet this summer and do the main front to rear, all the front ones that cross the 'down, across, up etc around tunnel' have been done, these are a...
- Fri Mar 08, 2024 12:17 pm
- Forum: Engine (20)
- Topic: Replcing maf
- Replies: 8
- Views: 2866
- Fri Feb 09, 2024 7:14 pm
- Forum: Parts, Accessories & Brochures
- Topic: Volvo K 6683 instrument cluster
- Replies: 12
- Views: 3245
Re: Volvo K 6683 instrument cluster
does this link help?
viewtopic.php?f=12&t=34956&hilit=speed+sensor
discussion about 'alternatives' and ways to measure them.....
viewtopic.php?f=12&t=34956&hilit=speed+sensor
discussion about 'alternatives' and ways to measure them.....
- Thu Feb 01, 2024 9:14 pm
- Forum: Engine (20)
- Topic: Oil leak
- Replies: 12
- Views: 712
- Thu Feb 01, 2024 5:36 pm
- Forum: Engine (20)
- Topic: Oil leak
- Replies: 12
- Views: 712
Re: Oil leak
Roy
aye , I reckon it is, not easy to access with the engine in place,
I think Jay Kay explained how he fixed it, but his engine was on the bench/floor
aye , I reckon it is, not easy to access with the engine in place,
I think Jay Kay explained how he fixed it, but his engine was on the bench/floor
- Mon Jan 29, 2024 9:43 pm
- Forum: Engine (20)
- Topic: Oil leak
- Replies: 12
- Views: 712
Re: Oil leak
Roy
type this into the search bar
Aux Shaft Plug
and it will give you the correct section, about 30 odd photos into the thread
viewtopic.php?f=23&t=34966&p=221205&hil ... ug#p221205
type this into the search bar
Aux Shaft Plug
and it will give you the correct section, about 30 odd photos into the thread
viewtopic.php?f=23&t=34966&p=221205&hil ... ug#p221205
- Sun Jan 28, 2024 7:25 pm
- Forum: Engine (20)
- Topic: Oil leak
- Replies: 12
- Views: 712
Re: Oil leak
I have a persistant 'weep' from the area around the drive for the oil pump, (just aft of the cam belt, near-ish starter) I never actually got to the root, although I suspect it's an easy fix ? ?? (as long as the engine is on the bench) :hopping: I think JKM has posted some images? Small druibbles ar...
- Sun Jan 21, 2024 7:50 pm
- Forum: The secret life of a 480 owner...
- Topic: 480 turbo CC Bello
- Replies: 115
- Views: 71724
Re: 480 turbo CC Bello
Is that the bonnet (hood) ? GRP can suffer from moisture ingress, ask me how I know having had a selection of Reliants
- Fri Jan 19, 2024 7:43 pm
- Forum: The secret life of a 480 owner...
- Topic: 480 turbo CC Bello
- Replies: 115
- Views: 71724
Re: 480 turbo CC Bello
Yes Alan, I did that way but without the wheel on position. I screwed the internal allen screw until the disc was locked and then unscrew half turn. Then rised the hand brake three clicks and then screwed the bottom central nut until the disc was locked. I undertand that I have to compensate wear w...
- Fri Jan 19, 2024 11:36 am
- Forum: The secret life of a 480 owner...
- Topic: 480 turbo CC Bello
- Replies: 115
- Views: 71724
Re: 480 turbo CC Bello
Hector I think you need to get the BOTTOM calipers to 'just' scuff the disc THEN adjust the central balance bar, otherwise you have lost 'parking brake effciency' and it will usually fail a UK MoT :-( best to put the wheel on to centralise the disc (or a couple of big washers/nuts to clamp the disc ...
- Thu Jan 18, 2024 12:23 pm
- Forum: The secret life of a 480 owner...
- Topic: 480 turbo CC Bello
- Replies: 115
- Views: 71724
Re: 480 turbo CC Bello
Maybe not an issue but I had the SHORT single cable that links handbrake to the 'balance bar' become a little sticky, VERY difficult to change! lots of grease applied made a difference :wink: The springs at the caliper 'should' be sufficient to pull the cable back to the 'off position' when central ...
- Sun Jan 14, 2024 10:38 pm
- Forum: The secret life of a 480 owner...
- Topic: 480 turbo CC Bello
- Replies: 115
- Views: 71724
Re: 480 turbo CC Bello
Jeff has done a 'how to service rear brakes' but a quick check is to make sure that when OFF the cam at the caliper is against the stop. it is possible that a previous owner has taken up all the slack at the adjuster under car (your first picture) and so no travel left? there is a small plug , it sh...
- Wed Jan 10, 2024 9:46 am
- Forum: The secret life of a 480 owner...
- Topic: 480 turbo CC Bello
- Replies: 115
- Views: 71724
Re: 480 turbo CC Bello
There is a very thin silicone type sealant, Captain Trolley's Creeping that might work on the cracks??
NOTE I have never used it but others swear by it (or maybe swear AT it?)
I just flexed the lens slightly and pressed in some normal sealant
NOTE I have never used it but others swear by it (or maybe swear AT it?)
I just flexed the lens slightly and pressed in some normal sealant
- Tue Jan 09, 2024 11:45 am
- Forum: Engine (20)
- Topic: leaking coolant from Methalic T
- Replies: 6
- Views: 11270