Volvo 480 Club Europe

100 Pounds for the 3 pack.

For sale 3 ecus pack: 2 orange and 1 blue.
150 euros + shipping from Romania.

me too

i have an orange ecu with double PCB

other type of ats on my car with 195/55/15 fronts and 205/50/15 rears

the same question here, 2 types of camshaft are used on b18ft:
- marking 2and3
-marking 1, 3, 5

i found that the 1-3-5 one make a slightly bigger cam lift.

damn.... this week the same issue happened to my engine, it's like copy and paste
In my case, 3 years ago when i changed a valve, i didn't restrenghtened the head after 500km, and that is the cause the gasket failure in my opinion. When i taked of head 2 days ago, i found the bolts slacke.

bnz is runing megasquirt just fine on b18ft

as a very rough guide not taking inefficiency into account double the pressure double the power (pv=nrt).atmospheric pressure of a na engine =14.7 psi(1bar). so 100 hp na roughly 200 hp at 14psi boost.(minus volumetric efficiency and heat loss probably about 20hp).i would guess about 180hp ish at 1...

i'm interested to know what bhp result with t25+richmod at 1bar

i put one of these: http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0362720886

Hi,
i have an aftermarket adjustable fuel pressure regulator with gauge and my adapter is an old fuel p regulator sliced and welded.

If your 480 are euro2 norm, removing the cat will produce mot failure.

b18ft has no air temp sensor, it has MAF

Could be a faulty fuel pressure regulator or map sensor.

I've replaced the other split hose, regassed, and the car is chilled.

i've found some aftermarket ac installations and schematic.

i'm tottaly confused





this is my ac setup

Hello, Since i buyed my 1990 480turbo, the aircon was defective and these days i started to fix the problem(a split hose). I've replaced the hose(i kept only the metal ends), fitted and regassed. After regassing and engine running, the dryer gets warm and after few moments when i put revs higher, a ...

Hi there , I finally have my MS II computer , now a few questions . 1. do i need to buy special sensors or can i use the stock sensors. in other words is it "plug and play" . 2. are there any How to's availeble for changing from standard computers to MS . Thanks in advance Sieger Read the Megamanual!