Volvo 480 Club Europe

Ocasionally, my 480t is going to instable idle and the fix is to disconect and clean the maf connector.

...0.5 bar? ....

Greenpeace??

Our headlights are 7X6 ?

It's seems that your MFU not receive fuel(injectors) signals. May be a faulty wire or broken MFU.

those lamps are annoying to road participants??.... blinding others??

http://cgi.ebay.com/ebaymotors/UNIVERSAL-4X6-CRYSTAL-CLEAR-GLASS-HEADLIGHTS-W-BULBS_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem120375842065QQitemZ120375842065QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcc...

If you connect the original narrow band sensor to a gauge, the reading will not be accurate. Use wideband controller+sensor to read accurate AFR.

i have metric 10 bolts and metric 17 nuts

resistor packs its used for low imp. injectors to fit a high imp. match

a msII V3 ecu and a harness

yes, a loose wheight schedule for a couple houndred kilos

cliffeydawlish wrote:you can remapp any ecu on any car and will gain approx 20 -45 bhp

whithout cam change, porting, etc
...generous numbers and optimistic

but why do not use a b18ft swap?.... is the easiest and cheap way to obtain more power than your 2.0 n/a.....
....its like you want to scratch the left ear with the right hand...

better way is the 1.8 16v or 2.0 16v from Renault, for a mechanical easy fit(gearbox, mounts, etc).

looms are the same, differences between engine ecu's are related with crankwheel sensors( 2or 3 wires)

ok, let's say i have some friends with +200hp fwd: - 1)1.7t r5gtt forged pistons, sds ecu, ceramic clutch, ultra light wheigtened, drivetrain, brakes, etc (about 250hp)... when i drove it on a track the car is insane behaving like on ice but manageable on straight line.... but i will never drive tha...

Hi thanks guys for yours replays, I have a friend that has a Renault 5 with volvo engine th same as me but with a bigger turbo and injectors, but the turbo spools only after 4800 rpm, so he has a big problem bacause RPM limiter is set about 6400 rpm or less so he only has about 1500 rpm of power Lo...

your .msq setup are 8cyl?

the freezer and boiler way is a better way to find out.

how about the knock control.... what controller? ...i'm planning to use lxe6