Search found 12 matches

by Sill
Wed Jan 25, 2006 1:48 pm
Forum: Tuning And Tweaking
Topic: Urgent - Torque settings
Replies: 10
Views: 6634

I saw a engine rebuild manual on this page. Unfortunately it was no longer available on the server.

Could someone post it again?
by Sill
Thu Jan 12, 2006 8:42 pm
Forum: Tuning And Tweaking
Topic: Torque Steer after richmod
Replies: 17
Views: 4021

Tourqe steer depends on the distance (in the tire contact patch) between the tyre centre and the imaginary line between the strut bearing and the wheel arm ball point. If you have changed the wheel offset then you can get more tourqe steer. Otherwise its most likely a result of the increased engine ...
by Sill
Thu Jan 05, 2006 2:59 pm
Forum: Tuning And Tweaking
Topic: losing the REV Limiter??? can we???
Replies: 14
Views: 3917

The revlimiter is a single hex number in the engine management. If you know where its located then its possible to change it.

The problem is knowing were it is :)
by Sill
Sat Dec 31, 2005 4:00 pm
Forum: Tuning And Tweaking
Topic: volvo turbo engine, different body
Replies: 52
Views: 11927

I have a Renault 5 GTE that i have fitted a 88 480 turbo engine in. Im only registred on this site exept for some sites in Sweden where i live. 480 turbo engine. http://forum.lazzat.se/attachment.php?attachmentid=10001 Fairy standard exept 0.7 bar boost, 2.5 inch exhaust with no cat and a sierra cos...
by Sill
Sat Dec 31, 2005 3:52 pm
Forum: Tuning And Tweaking
Topic: B18 FT max potential
Replies: 4
Views: 2201

I dont think that the standard rods can handle more than perhaps 250 bhp as they are identical to the NA models.

But nobody seems to know for sure.
by Sill
Sat Dec 31, 2005 3:50 pm
Forum: Tuning And Tweaking
Topic: ajustable cam pulley, worth it or not?
Replies: 9
Views: 2653

I will use a camshaft from an 87 ES (the 109 bhp without cat). It has a lot more lift and duration than the standard turbo camshaft. Piston to valve clearance might be an issue but i have adjusted that also. That engine uses the same pulleys and flywheel as the turbo engine so i think that the timin...
by Sill
Sun Dec 04, 2005 6:38 pm
Forum: Tuning And Tweaking
Topic: EZ210k map locations and info
Replies: 9
Views: 3648

480_rocket wrote:Have you got the binarys to download?
Here are three binarys. Taken from another forum.
http://www.chiptuningforum.com/phpbbchi ... hp?id=7050
by Sill
Sat Dec 03, 2005 1:17 am
Forum: Tuning And Tweaking
Topic: EZ210k map locations and info
Replies: 9
Views: 3648

EZ210k map locations and info

The other thread got locked. I think this is something worth talking about. This is what i have figured out by looking att different Eprom binarys. I have found one rpm scale. I think its a Rpm scale for boost and ignition. Boost 5B00-5B70 The first a row of zeroes could be a part of the boost map. ...
by Sill
Wed Nov 30, 2005 9:46 pm
Forum: Tuning And Tweaking
Topic: EZ 210K and LH2.2 specs soon to be posted.
Replies: 74
Views: 15813

Im not 100% sure if i have got everything right. Have not found any information so this is what i think is correct. This is what i have figured out by looking att different Eprom binarys. I have found one rpm scale. I think its a Rpm scale for the boost and ignition. Ez210k Boost 5B10-5B70 Overboost...
by Sill
Fri Nov 25, 2005 1:38 pm
Forum: Tuning And Tweaking
Topic: Intercoolers
Replies: 31
Views: 7616

Im using a Ford Sierra Cosworth intercooler. Have seen another Clio with Volvo turbo engine that uses a Ford ic.

My Volvo 480 intercooler was leaking and wasnt going to fit anyway.

Later models of Saab 900 and 9-3 has one that could fit also.
by Sill
Tue Nov 01, 2005 9:59 pm
Forum: Tuning And Tweaking
Topic: EZ 210K and LH2.2 specs soon to be posted.
Replies: 74
Views: 15813

im not going to add anything about the original post, as that has been covered, but has anyone thought that it *could* be good for someone other than rich to post the specs here? i mean, rich has his hands tied with what he can and cant discuss, and as has also been said, has been honourable enough...
by Sill
Mon Oct 31, 2005 11:23 am
Forum: Tuning And Tweaking
Topic: EZ 210K and LH2.2 specs soon to be posted.
Replies: 74
Views: 15813

Would be really nice if you post the specs. My chip burner arrives shortly :)